નીચા દબાણ લવચીક પોર્ટેબલ પુ કાસ્ટિંગ પોલીયુરેથીન મેમરી ઓશીકું ઇન્સ્યુલેશન સ્પ્રે બનાવટી ફીઝ ઇન્જેક્શન મશીન ભાવ

ઉચ્ચ ઘનતા નીચા દબાણ PU ફોમ મશીન

ઉત્પાદન વર્ણન


This low pressure polyurethane foam injecting machine is mainly which is widely employed in the production of rigid foam like imitation wood furniture, household appliances (refrigerator, freezer, water heater), thermal insulated building materials, automobile interiors and so on.

The machine owns features as high repeat injection precision, even mixing, stable performance, easy operation, high production efficiency, etc
This machine is controlled by PLC, high accuracy, simple operation, convenient maintenance. When pre-set first injection is finished, the alarming relay will give alarms.

Main components


Material system consists of material tank,filter tank, metering pump, material pipe, pouring head, cleaning tank.
1-Material Tank:
Double interlining material heat tank with insulation outer layer, heart rapidly, low energy consumption. Liner, upper and low head all use stainless 304 material, upper head is precision machinery sealing equipped to make sure the air tight agitation.
2-Filter tank:
Material in the tank flow to the filter tank Φ100X200 by discharge valve, flow to the metering pump after filtering. Sealing flat cover on the tank, inner tank with a filter net, tank body with a feeding and discharge port, there is a discharge ball valve below the tank.
3. Metering pump:
High precision CB-B series gear metering pump (pressure-tolerant 4MPa), make sure the metering and ration accurate and stable.
4-Material pipe:
Raw materials are delivered in pipeline to mixing head. A material pipe adopts high strength anticorrosion PTFE hose, which can effectively avoid the chemical reaction with raw material and influence its quality. B material pipe adopts high strength rubber hose, pressure resistant 8MPa.
5-Mixing device (pouring head):
Adopting floating mechanical seal device, high shearing spiral mixing head to make sure the even mixing within required adjusting range of casting mixing ratio.
6-Cleaning Tank:
110 feed inlet flange gland, 1/4" stainless steel ball valve. PTFE tube liquid level gauge, outlet (filter attached) and discharge port on bottom.

મિકસિંગ હેડ


2800-5000rpm, forced dynamic mixin
The mixing head adopts floating mechanical seals, and its high shear mixing screw head, which can mix two materials with better performance.

Material Tank


Volume 120 L, Qty: 2
Double interlining material heat tank with insulation outer layer, heart rapidly, low energy consumption. Liner, upper and low head all use stainless 304 material, upper head is precision machinery sealing equipped to make sure the air tight agitation.

Cleaning tank


Material: stainless steel
Capacity: 20 L
Feeding flange: φ110 The outlet is in the bottom side.

ઝડપી વિગતો


પ્રક્રિયા પ્રકાર: ફૉમિંગ મશીન
શરત: નવું
મૂળ સ્થાન: ચીન (મેઇનલેન્ડ)
બ્રાન્ડ નામ: ઇએમએમ
વોલ્ટેજ: 220V
Power(W): 30KW
Dimension(L*W*H): 1590x1200x2400mm
Weight: 2500kg
પ્રમાણન: સીઇ
વોરંટી: 1 વર્ષ
વેચાણ પછીની સેવા પૂરી પાડવામાં આવેલ: ઇજનેરો વિદેશમાં સેવા મશીનરી માટે ઉપલબ્ધ
Color: Can be customized
Dimension: 3600mm x 1250mm x 2300mm
Machine weight: 1350kg
Pressure: Low pressure
Raw Material: Poly & ISO
કંટ્રોલ સિસ્ટમ: પીએલસી + ટચ સ્ક્રીન
spare parts: Chiller / cooling system
Feeding: Automatic feeding
Application: PU foam product making
Item: Polyurethane foaming inje